Samsung BD-P1000, Service Manual

Page: 116 / 130

Operating Instructions
12-30 Samsung Electronics
English - 41
S
ystem Setup
4
Press the …† buttons to select the desired audio
option from the options described below, then press
the
ENTER or
√
button.
5 Press the …† buttons to select the desired item,
then press the ENTER button.
■
Press the RETURN or
œ
button to return
to the previous menu.
Press the
MENU button to exit the menu.
NOTE
Digital Output
• PCM : Select this when your equipment does not
decode Dolby Digital.
• Bitstream : Outputs Dolby Digital or MPEG-2 or DTS
audio as bitstream. Select this when your
AV receiver or AV amplifier has a Dolby
Digital or MPEG-2 or DTS Decoder.
PCM Down Sampling
• On : Select this when the Amplifier connected to the
player is not 96KHz compatible.
In this case, the 96KHz signals will be down
converted to 48KHz
• Off : Select this when the Amplifier connected to the
player is 96KHz compatible. In this case, all
signals will be output without any changes.
■
LPCM sound track is always outputted as PCM.
■
Be sure to select the correct Digital Output or
you will hear no sound or a loud noise.
■
When playing a Dolby Digital movie make sure
the Digital Output is set to Bitstream.
■
If you have the unit connected via the 5.1
channel analog outputs and play a DVD Dolby
Digital disc, sound will only be heard from the
Front Left and Right speakers.
■
If you have the unit connected via any analog
output and play a DTS DVD disc, no sound
will be heard. To hear sound, the digital output
must be connected and set to Bitstream.
NOTE
■
Even when PCM Down Sampling is set to Off,
some discs will only output downsampled
audio though the digital outputs.
NOTE
HDMI
• If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS, MPEG), you
should set Digital Audio to PCM.
• If your TV is not compatible with LPCM sampling rates
over 48kHz, you should set PCM Down Sampling to On.
Setting up the Speaker
Options
1
With the unit in Stop mode, press the MENU
button.
2
Press the …† buttons to select Setup , then press
the ENTER or
√
button.
3
Press the …† buttons to select Audio Setup , then
press the ENTER or
√
button.
4 Press the …† buttons to select Speaker Setup ,
then press the ENTER or
√
button.
BD
BD Player Setup
Memory Card
Title
Music
Photo
Setup
√
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup
√
BD
BD Player Audio Setup
Memory Card
Title
Music
Photo
Setup
√
Digital Output : PCM
√
PCM Down Sampling : On
√
Dynamic Compression : On
√
Speaker Setup
√
BD
BD Player Speaker Setup
Test Tone
L
Small
LS
Small
R
Small
Small
C
LFE
RS
Small
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
• Off : You can enjoy the movie with the standard
Dynamic Range.
• On : When Movie soundtracks are played at
low volume or from smaller speakers, the
system can apply appropriate
compression to make low-level content
more intelligible and prevent dramatic
passages from getting too loud.
MOVE SELECT RETURN EXIT
MOVE SELECT RETURN EXIT
MOVE SELECT RETURN EXIT
A
A
A