04
Settings
Networks and the Internet
When you connect this player to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE,
and upgrade the player's software through the
network connection. For more information about
accessing and using Internet services, see the
Network Services chapter of this manual on pages
45~56. Instructions for configuring the network
connection start below.
Configuring Your Network Connection
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
If you are connecting to a wired network, connect
the player to your router using a LAN cable before
you start the configuration procedure.
If you are connecting to a wireless network,
disconnect any wired network connection before
you begin.
To begin configuring your network connection,
follow these steps:
Wired Network
Ğ
Wired - Automatic
1.
In the Home screen, select
Settings
, and
then press the
v
button.
2.
Select
Network
, and then press the
v
button.
3.
Select
Network
Settings
, and then press the
v
button.
4.
Select
Wired
in the Network Settings screen,
and then press the
v
button.
5.
Select
Connect
button, and then press the
v
button. The product detects the wired
connection, verifies the network connection
and then connects to the network.
Ğ
Wired - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow Steps 1 and 2 in Wired Network, and then
follow these steps:
1.
Select
Network Status
. The player searches
for a network, and then displays the
connection failed message.
2.
On the bottom of the screen, select
IP
Settings
, and then press the
v
button.
The IP Settings screen appears.
3.
Select the IP Setting field, and then press the
v
button.
4.
Select
Enter manually
in the IP Setting field,
and then press the
v
button.
5.
Select a value to enter (
IP Address
, for
example), and then press the
v
button.
Use the number keypad on your remote
control to enter the numbers for the value.
You can also enter numbers using the ▲▼
buttons. Use the ◄► buttons on the remote
control to move from entry field to entry field
within a value. When done with one value,
press the
v
button.
6.
Press the ▲ or ▼ button to move to another
value, and then enter the numbers for that
value following the instructions in Step 5.
7.
Repeat Steps 5 and 6 until you have filled in
all values.
|NOTES |
\
You can get the Network values from your Internet
provider.
8.
When finished entering all the values, select
OK
, and then press the
v
button. The
player verifies the network connection and
then connects to the network.
English
27
|
02348L-BD-F6500-EN-ENG.indd 27
2013-02-05 오후 4:59:12
