ENGLISH-12
Check the name of the components
Buttons on the control panel
Control panel buttons
sec
Cleanness indicator
Shows the current cleanness of the air .
Button lock indicator
Filter clean/replacement
indicator
Auto mode indicator
Strong mode indicator
Weak mode indicator
Sleep mode indicator
Displayer function indicator
Control panel buttons
Start/Stop button
To turn the air purifier on or off .
Mode button
To select Auto, Strong, Weak or Sleep mode .
sec
Filter reset button (Touch more than 3 seconds)
To reset the filter cleaning or replacement alarm
Lock button
To set or release the button lock .
• Press the [ ] button on the control panel to start the operation . The indicators show the current operating mode
with the status .
• If you press a button, the corresponding indicator turns on with a ringing sound, indicating that the selected
function is selected .
• If your turn on the power after closing it, the product will work as the last status before the power is turned off .
NOTE
Cleanness indicator
• Shows the current cleanness of the air through the dust and gas sensors .
• The cleanness indicator operation
(Polluted) Red
Yellow
Green
Blue (Clean)
• Status of the cleanness indicator may change often or may not change for long time depending on the
surrounding environment . There is no problem with the product .
NOTE
