9
ENGLISH
2. Open the water bottle cap.
- Turn the bottle cap in an anticlockwise direction. Before opening the
water bottle, press the port in the middle of the bottle cap, which will
release the vacuum and make the bottle cap easier to open.
Port
3. Filling water for the water bottle.
- Use tap water (which shouldn’t be hotter than 40 °C).
- When filling the bottle, you should grip the water bottle tightly.
4. Close the water bottle cap.
- Turn the bottle cap in clockwise direction.
5. After putting the water bottle into the water bottle box(
①
), attach the
upper cover(
②
).
①
②
Upper cover
Water bottle handle
Water bottle
NOTE
• When the appliance runs out of water during operation, (water supply) light will flash.
• To start the humidification mode, allow about 1-5 minutes after filling the water bottle when the appliance is
supplied with enough water, (water supply) light will go out and then return to the previous mode.
• This product cannot decrease the humidity level since it doesn’t have the dehumidification function. If you use
the product in a small space with doors closed, humidity level may get higher than you desire. Therefore, try to
open the doors for a little bit to keep the indoor humidity at pleasure level.
• Tap water reduces the bacterial growth of the water bottle and tray as the tap water contains chlorine. If the
hardness of tap water is high, white powder (impurities) may be formed on a filter or tray. In this case, clean the
appliance more frequently.
• When the water from reverse osmotic pressure water purifier is used, less white powder will be generated than
using tap water. However, as the water of reverse osmotic pressure water purifier does not have chlorine there
could be faster bacterial growth. Clean the water bottle or tray more frequently with a neutral detergent and
using tap water is recommended. (Reverse osmotic pressure method : Pressure larger than osmotic pressure is
applied to the denser solution so that water can move to the light part for purification.)
• Hardness indicates the amount of calcium ion and magnesium ion in water. Limestone and shoreline area shows
high hardness.
• If you assemble the water bottle incorrectly after supplying the water, this may result in water leakage.
• Product will not operate if the upper cover is not properly closed after filling the water.
CAUTION
ACR PAPER-AR_IB_05556A-00_EN.indd 9
2015-07-01 오전 10:18:04
