Samsung AS09HPA, Training Manual

Page: 34 / 82

33 Samsung Electronics
Feature & Operation
●
Initial operating (Cooling/Heating) mode setup
●
1. When operation is in the automatic mode at power reset, or when selecting the automatic mode.
●
1. 1) "Room Temperature
≥
Setting Temperature"
●
1. 1)
➞
Automatic cooling operation with the setting temperature as a target
●
1. 2) "Room Temperature < Setting Temperature"
●
1. 1)
➞
Automatic heating operation with the setting temperature as a target
●
2. Turned off with automatic mode selected and turned on again
●
1. 1) If cooling operation was running in the previous automatic mode.
●
1. 2) If heating operation was running in the previous automatic mode.
2. In case of Cooling only model.
◆
In case the Room Temp.
≥
Ts+1.0˚C the unit is operated Compressor.
◆
In case the Room Temp.
≤
Ts the unit is not operated Compressor.
◆
Tr : Room temperature.
◆
Ts : Setting temperature.
Room temperature (Tr) area
While the power is turned down
Mode configuration for
when the power is turned on. the power on.
A, B, C area Independent to time Set cooling mode
C' area
Within 1 hour from the power off. Set cooling mode
1 hour after the power off Set heating mode
B' area
Within 1 hour from the compressor off Set cooling mode
1 hour after the compressor off Set heating mode
A' area After 3 minutes delay of the compressor Set heating mode
Room temperature (Tr) area
While the power is turned down
Mode configuration for
when the power is turned on. the power on.
A', B', C' area Independent to time Set heating mode
C area
Within 1 hour from the power off. Set heating mode
1 hour after the power off Set cooling mode
B area
Within 1 hour from the compressor off Set heating mode
1 hour after the compressor off Set cooling mode
A area After 3 minutes delay of the compressor Set cooling mode
Operating Type Room Temp.
Cool Operation
Tr
≥
Ts+1.0˚C Compressor ON
Tr
≤
Ts Compressor OFF
DB98_20801A(1)_1 12/24/04 10:46 AM Page 33