1
.
After setting the User, press the
“START/STOP” button again, and
then the monitor will complete the
measurement automatically.
Ready for measurement
Inflating and measuring.
Taking a Measurement
START/STOP BUTTON
SYS
DIA
HR
SYS
DIA
HR
SYS
DIA
HR
SYS
DIA
HR
After
the measurement was finished, the Systolic pressure, Diastolic
pressure and heart rate will show up alternately
The patient must relax as much as possible and do not move and talk during the
measurement procedure.
For a meaningful comparison, try to measure under similar conditions. For example,
take daily measurements at approximately the same time, on the same arm, or as
directed by a physician.
Take the measurement in a silent room.
The cuff should maintain at the same level as the right atrium of the heart.
Please sit comfortably. Do not cross your legs and keep your feet flat on the ground.
Keep your back against the backrest of the chair.
Tip:
You can press “ START/STOP ” button at any time to stop measuring
during the process of measurement.
2
.
This device will proceed to data
transmission automatically after
measurement.
If the data transmission fails, the monitor will turn off automatically.
SYS
DIA
HR
SYS
DIA
HR
3
.If the data is successfully
transmitted, the LCD will
display and then the
device will turn off.
SYS
DIA
HR
MEASUREMENT
MEASUREMENT
13
12
