10
3-1 Test Mode
u
How to Approach Test Mode
You can approach the test mode by pressing the on/off
switch of indoor unit for 5 seconds.
u
Test mode operation option
After installing the air conditioner, check whether each subordinate is normally operated or not by
operating the test mode.
•
When an Error occurs, display the Error Mode.
•
Operation Mode
: Cool mode. operate the cool mode by operating the compressor by force
without the compressor ON/OFF according to the set temperature/indoor temperature. (Do not
follow the antifreeze control)
•
Up-down louver :
Up-down swing mode
•
Indoor Fan :
Turbo
Note
•
Because the heat mode operate the cool mode by force not related to the set temperature
/ indoor temperature, check whether each subordinate is operated normally or not after
completing installation and must turn off the power of the air conditioner.
3. Alignment and Adjustments
Summary of Contents for AR09TXFYAWKNEU
Page 43: ...43 8 3 DISPLAY PCB DB92 04833B ...
Page 68: ...68 11 1 Indoorunit 11 Block Diagram ...
Page 69: ...69 11 2 Outdoorunit ...
