29
English
Installation
Only for multi system
(Wried remote controller, central remote controller
etc.)
1
Turn the power off and take off the cover panel of
the indoor unit.
1
2
2
Attach the Sub PCB to the Case Sub PCB.
3
Assemble the Case Sub PCB to the indoor unit.
Sub PCB
Case Sub PCB
4
Find the PCB wire, and connect the wire to the
Sub PCB as seen in the picture.
5
Connect the wire(remote controller, central
remote controller etc) to the Sub PCB.
6
Assemble the Cover PCB and the front panel.
❈
If the Sub PCB is not installed, arrange
the wire for multi system (connection) as
shown in the illustration.
Wire for multi
system connection
NOTE
•
The Sub PCB is attached to be controlled by the
wired remote controller and central controller.
Sub PCB installation(optional)
Summary of Contents for AR**MXPD Series
Page 30: ...DB68 06730A 03 ...
