background image

Carefully follow the precautions listed below because they are essential to guarantee the safety of the equipment.

•  Always disconnect the air conditioner from the power supply before servicing it or accessing its internal components.
•  Verify that installation and testing operations are performed by qualified personnel. 
•  Verify that the air conditioner is not installed in an easily accessible area.

General information

 

Carefully read the content of this manual before installing the air conditioner and store the manual in a safe place in order 

to be able to use it as reference after installation. 

   For maximum safety, installers should always carefully read the following warnings.

 

   Store the operation and installation manual in a safe location and remember to hand it over to the new owner if the air 

conditioner is sold or transferred.

   This manual explains how to install an indoor unit with a split system with two SAMSUNG units. 

The use of other types of units with different control systems may damage the units and invalidate the warranty.  

The manufacturer shall not be responsible for damages arising from the use of non compliant units.

   This product has been determined to be in compliance with the Low Voltage Directive (2006/95/EC), and the 

Electromagnetic Compatibility Directive (2004/108/EC) of the European Union.

   The manufacturer shall not be responsible for damage originating from unauthorized changes or the improper connection 

of electric and requirements set forth in the “Operating limits” table, included in the manual, shall immediately invalidate 

the warranty.

   The air conditioner should be used only for the applications for which it has been designed: the indoor unit is not suitable 

to be installed in areas used for laundry.

   Do not use the units if damaged. If problems occur, switch the unit off and disconnect it from the power supply.

   In order to help prevent electric shocks, fires or injuries, always stop the unit, disable the protection switch and contact 

SAMSUNG’s technical support if the unit produces smoke, if the power cable is hot or damaged or if the unit is very noisy.

   Always remember to inspect the unit, electric connections, refrigerant tubes and protections regularly. These operations 

should be performed by qualified personnel only.

   The unit contains moving parts, which should always be kept out of the reach of children.

   Do not attempt to repair, move, alter or reinstall the unit. If performed by unauthorized personnel, these operations may 

cause electric shocks or fires.

   Do not place containers with liquids or other objects on the unit.

   All the materials used for the manufacture and packaging of the air conditioner are recyclable.

   The packing material and exhaust batteries of the remote controller(optional) must be disposed of in accordance with 

current laws.

   The air conditioner contains a refrigerant that has to be disposed of as special waste. At the end of its life cycle, the air 

conditioner must be disposed of in authorized centers or returned to the retailer so that it can be disposed of correctly and 

safely.

Installing the unit

IMPORTANT:  When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines.  

Always disassemble the electric lines before the refrigerant tubes.

 

Upon receipt, inspect the product to verify that it has not been damaged during transport. 

If the product appears damaged, DO NOT INSTALL it and immediately report the damage to the carrier or retailer (if the 

installer or the authorized technician has collected the material from the retailer.)

Safety precautions

Installation

English-28

A3050 FA_IB&IM_DB68-04003A_HP_EN.indd   28

2013-12-25   15:27:41

Summary of Contents for AR FQSS Series
























































Reviews: