Basic function
Basic operation is an operation mode that can be selected by pressing the
Mode
button.
Auto(2-Step Cooling or Heat)
In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the room
temperature detected by the room temperature sensor .
• 2-Step Cooling mode sets the air conditioner to operate in Fast + Cool mode when set temperature is lower than indoor
temperature, and then the air conditioner will automatically operate in Dry mode when indoor temperature reaches set
temperature .
Cool
In Cool mode, the air conditioner will cool your room . You can adjust the temperature and the fan speed to feel cooler in hot
season .
• If current outside temperature is much higher than the selected indoor temperature, it may take time to bring the inner
temperature to the desired coolness .
Dry
The air conditioner in Dry mode acts like a dehumidifier by removing moisture from the indoor air .
Dry mode makes the air feel refreshing in a humid climate .
To activate the Dry mode, set temperature
on the remote controller
should be lower than indoor room temperature .
Fan
Fan mode can be selected to circulate your room . Fan mode will be helpful to refresh the stale air in your room .
Heat
The air conditioner heats as well as cools . Warm your room with this versatile appliance in the cold of winter .
• Fan may not operate for about 3~5 minutes at the beginning to prevent any cold blasts while the air conditioner is
warming up .
• Since the air conditioner heats the room by taking heat energy from outdoor air, the heating capacity may decrease when
outdoor temperature is extremely low .
Use an additional heating appliance in combination with the air conditioner if you feel the air conditioner heats
insufficiently .
Basic function
English-14
A3050 FA_IB&IM_DB68-04003A_HP_EN.indd 14
2013-12-25 15:27:34
