background image

Cleaning Your Air Conditioner

To get the best possible use out of your air conditioner, you must clean
it regularly to remove the dust that accumulates on the air filter.

IM

PORTANT

Before cleaning your air conditioner, ensure that you have

switched off  the breaker used for the unit.

1

Loosen two fixing screws of left and right.
Pull the air inlet grille lightly and pull out the air filter in an upward 
direction to release them.

2

Remove all dust on air filter with a vacuum cleaner or brush.
In case of serious dust accumulation, put the air filter in warm detergent 
water and shake it vertically.

3

Dry the air filter.

4

When you have finished, insert the bottom part of the filter into 
their slot and push down until they click into place.

5

Clean the front panel with the damp cloth and mild detergent 
(do not use benzene, solvents or other chemicals).

N

N

N

N

o

o

o

o

tt

tt

e

e

e

e

If you have not used the air conditioner for a long period of time:

Check that the air filter is clean and remove any dust

Set the fan going for three to four hours to dry the inside

of the air conditioner thoroughly

Turn the switch off after stopping the operation

Cover the outdoor unit with a protective cover.

E-

17

Summary of Contents for AP500PF



































Reviews: