You must select the COOL mode if you wish to adjust the:
◆
Cooling temperature
◆
Fan speed when cooling
1
If necessary, press the ON/OFF( ) button.
Result:
◆
The power indicator on the control panel comes on.
◆
The indoor unit beeps twice.
◆
The operation mode previously set is displayed.
◆
The air conditioner starts up in the mode selected
when the unit was last used.
IM
PORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆
Switched on
◆
Stopped
It will start up normally after a three-minute rest period.
2
If the COOL indicator is not displayed, press the MODE button one
or more times until it appears.
Result:
◆
The indoor unit beeps each time you press MODE.
◆
The air conditioner starts up in COOL mode.
To operate the unit by remote control, press the COOL button.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
◆
You can change modes at any time.
3
If the “SET TEMP” and “TEMP” indicators are not displayed,
press the TIME/TEMP. SELECT button to appear it.
4
To adjust the temperature, press the TIME/TEMP.
▲
or
▼
buttons
one or more times until the required temperature is displayed.
Possible temperature are between 18°C(65˚F) and 30°C(86˚F) inclusive.
Result:
◆
Each time you press the TIME/TEMP.
▲
or
▼
.
- The temperature is adjusted by 1°C(1˚F)
- The indoor unit beeps.
◆
The air conditioner will only start cooling if the room
temperature is higher than the selected temperature.
5
Select the fan speed by pressing the FAN SPEED button one or more
times until the required setting is displayed:
Low
Medium
High
To select the fan speed by remote control, press LOW, MID or HIGH buttons.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
Each time you press FAN SPEED, the indoor unit beeps.
6
To control the air flow direction when necessary, refer to page 14.
Cooling Your Room
E-
11
