63
ENGLISH
Installing the distribution header
1.
Ɗʪ̷ʪʀϩϩ˵ʪθʪʒЇʀʪθϩ˵ɇϩѣϩϑϩ˵ʪʒ̈ɇ͔ʪϩʪθͱ˙ϩ˵ʪΧ̈Χʪ
<Gas side>
Socket
Pipe *
To indoor unit
Pipe*
Socket
To outdoor unit
<Liquid side>
Socket
Pipe*
To indoor unit
Pipe*
Socket
To outdoor unit
Provided item
࢜
Pipe : Separately purchased item
2. If the number of connected indoor unit is fewer than ports on the distribution header, block the unused
ports with caps.
<Liquid side>
Case of blocking the unused
distribution header ports
Connect
in order
Welding part
Provided
item
<Gas side>
Case of blocking the unused
distribution header ports
Connect
in order
࡛ͱθड़âϩцΧʪʒ̈ϑϩθ̈ɵЇϩ̈ͱ͝˵ʪɇʒʪθࡤ
Connect the distribution header to the connection pipe with the provided reducer.
࡛ͱθçड़ȐϩцΧʪʒ̈ϑϩθ̈ɵЇϩ̈ͱ͝˵ʪɇʒʪθϑࡤ
Cut the provided socket, according to the diameter of the connection pipe, before connecting it.
ĮЭʪθߣߢड़ߣߧ͔͔
NOTE
࡛
Connect the indoor units in order, while respecting the direction of the arrow shown in the
illustration.
࡛
When indoor units are connected to same distribution head, indoor unit must be connected in order
of their capacity, from largest to smallest.
CAUTION
