Samsung AM160FNBFEB/EU, Training Manual For Installation, Service

Page: 20 / 74

2. Product Structure 2. Product Structure
<Function>
Detects the flow of fluid in the pipe and opens and closes the valve
Flow Switch
Detects the flow of fluid in the pipe and opens and closes the valve.
Delivers pipe clogging or water low information to the controller
to prevent secondary damage to the pump or the system.
<Mechanism>
The magnetturns the reed switch on and off.
i h l f h
Direction of
the liquid
< Precaution for replacement>
- Make sure to close the water pipe and remove the
water in the pipe connected to the flow switch
before using the replacement..
Determine the angle of the
paddle by checking
whether the
direction the valve's wire
inlet and the pipe
before using the replacement..
- Make sure to insert the O-RING supplied with the
flow valve
(marked with dashed line in the figure below)
90
±
5˚
inlet and the pipe
are aligned.