Samsung AM140RNPDKH Series, Installation Manual

Page: 23 / 36

Option setting Status
13. Setting SEG16, SEG17 option
Press Low Fan button( ) to enter SEG16 value.
Press High Fan button( ) to enter SEG17 value.
Each time you press the button,
… will be selected in rotation.
SEG16 SEG17
14. Setting Dry mode
Press Mode button to change to Dry mode in the OFF status.
15. Setting SEG18, SEG20 option
Press Low Fan button( ) to enter SEG18 value.
Press High Fan button( ) to enter SEG20 value.
Each time you press the button,
… will be selected in rotation.
SEG18 SEG20
16. Setting Fan mode
Press Mode button to change to Fan mode in the OFF status.
17. Setting SEG21, SEG22 option
Press Low Fan button( ) to enter SEG21 value.
Press High Fan button( ) to enter SEG22 value.
Each time you press the button,
… will be selected in rotation.
SEG21 SEG22
18. Setting Heat mode
Press Mode button to change to HEAT mode in the OFF status.
19. Setting SEG23, SEG24 mode
Press Low Fan button( ) to enter SEG23 value.
Press High Fan button( ) to enter SEG24 value.
Each time you press the button,
… will be selected in rotation.
SEG23 SEG24
Step 3. Checking the option you have set
After option setting is completed, press the Mode button to check whether the setting value you have input is correct or not.
Step 4. Inputting an option
Press the button while aiming the remote controller towards the indoor unit to complete the setting.
For the correct option setting, you must input the option twice.
Step 5. Checking operation
1. Reset the indoor unit by pressing the RESET button of indoor unit or outdoor unit.
2. Take the batteries out of the remote controller and insert them again and then press the
button.
ENGLISH-23
02
INST
ALLA
TION