t
Make sure that you earth the cables.
- Do not connect the earth wire to the gas pipe, water pipe, lighting rod or telephone wire. If earthing is not
complete, electric shock or fire may occur.
t
Install the circuit breaker.
- If the circuit breaker is not installed, electric shock or fire may occur.
t
Make sure that the condensed water dripping from the drain hose runs out properly and safely.
t
Install the power cable and communication cable of the indoor and outdoor unit at least 1 m away from the
electric appliance.
t
Install the indoor unit away from lighting apparatus using the ballast.
- If you use the wireless remote controller, reception error may occur due to the ballast of the lighting apparatus.
t
Do not install the air conditioner in following places.
- Place where there is mineral oil or arsenic acid. Resin parts flame and the accessories may drop or water may
leak. The capacity of the heat exchanger may reduce or the air conditioner may be out of order.
- The place where corrosive gas such as sulfurous acid gas generates from the vent pipe or air outlet. The copper
pipe or connection pipe may corrode and refrigerant may leak.
- The place where there is a machine that generates electromagnetic waves. The air conditioner may not
operate normally due to control system.
- The place where there is a danger of existing combustible gas, carbon fiber or flammable dust. The place
where thinner or gasoline is handled. Gas may leak and it may cause fire.
CAUTION
ENGLISH-5
01
PREAP
AR
A
TION
Summary of Contents for AM140RNPDKH Series
Page 36: ...DB68 08452A 00...
