Setting an indoor unit address and installation option
Option
4&(
4&(
4&(
4&(
4&(
4&(
&YQMBOBUJPO
1"(&
.0%&
The option mode
you want to change
The tens’ digit of an
PQUJPO4&(ZPVXJMM
change
The unit digit of an
PQUJPO4&(ZPVXJMM
change
Changed value
Indication and
Details
Indication Details Indication Details Indication
Details Indication Details Indication Details Indication Details
0
D
Option
mode
1~6
Tens’ digit
PG4&(
0~9
Unit digit
PG4&(
0~9
The
changed
value
0~F
You can change each digit of set option.
NOTE
Option
4&(
4&(
4&(
4&(
4&(
4&(
&YQMBOBUJPO
1"(&
.0%&
The option mode you
want to change
The tens’ digit of an
PQUJPO4&(ZPVXJMM
change
The unit digit of an
PQUJPO4&(ZPVXJMM
change
Changed value
Indication 0
D
2
1
7
1
t
When changing a digit of an indoor unit address setting option, set the SEG3 as ‘A’.
t
When changing a digit of indoor unit installation option, set the SEG3 as ‘2’.
Ex) When setting the ‘buzzer control’ into disuse status.
t
If you are using heat pump model, mixed operation mode (two or more indoor units operating
in different operation mode simultaneously) is not available when the indoor units are
connected to same outdoor unit. If you set the master indoor unit with a remote controller,
outdoor unit will operate in the mode which was set in the master indoor unit.
Changing a particular option
CAUTION
English-32
