Samsung AM AN1PCH Series, Installation Manual

Page: 42 / 48

42
Installation Procedure
English
Installation Pr
oc
edur
e
Changing the addresses and options individually
When you want to change the value of a specific option, refer to the following table and follow the steps in Common
steps for setting address and options on page 25 .
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Function Page Mode
Type of the
option to change
Tens position
of the option
number
Units position
of the option
number
New value
Indication
and
details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
0 D
Option
type
0 to F
Tens
position
value
0 to 9
Units
position
value
0 to 9
New
value
0 to F
Example: Changing the Buzzer control (SEG17) option of the installation options to 1 disuse.
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Function Page Mode
Type of the
option to change
Tens position
of the option
number
Units position
of the option
number
New value
Indication 0 D 2 1 7 1
ON ON ON
CAUTION
• Mixed operation (two or more indoor units operate in different modes simultaneously) is not available when the
indoor units are connected to the same heat pump outdoor unit (not heat recovery). If you set an indoor unit as the
main indoor unit by using the remote control, the outdoor unit will automatically operate in the current mode of the
main indoor unit.
Performing final check and trial operation
To complete the installation, perform the following checks and tests to ensure that the air conditioner operates
correctly.
1 Check the followings.
• Strength of the installation site
• Tightness of pipe connection to detect a gas leak
• Electric
wiring connections
• Heat-resistant insulation of the pipe
• Drainage
• Earth conductor connection
• Correct operation (follow the steps below)
ki]_TXXXW^hTWX†pt†k}tG~•‹Gm™ŒŒGXžˆ †hh†lu†U•‹‹GGG[Y YWYXTXWTYWGGG㝘㤸GXXa[_a\^