Samsung AM AN1PCH Series, Installation Manual

Page: 32 / 48

32
Installation Procedure
English
Installation Pr
oc
edur
e
Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
Function Page -
Setting MCU PORT
address
10-digit of MCU
address
1-digit of MCU MCU PORT address
Indication
and
details
Indication Details
-
Indication Details Indication Details Indication Details Indication Details
2
0
No MCU
PORT
0~1 10-digit 0~9 1-digit A~F
PORT
Location
1
MCU
PORT
address
setting
mode
CAUTION
• If you enter A to F to the SEG5 or SEG6, the indoor unit main address is not changed.
• If you enter 0 to the SEG 3, the indoor unit maintains the previous main address although you enter the option value
for the SEG5 or SEG 6.
• If you enter 0 to the SEG 9, the indoor unit maintains previous RMC address although you enter the option value for
the SEG11 or SEG12.
• You cannot set the SEG11 or SEG12 to F value at the same time.
• If the indoor unit is connected to the MCU, you can set the SEG 15~18.
Ex.) If you want to set the indoor unit to ‘A’ port of MCU #1.
(0A0000 – 100000 – 20101A -30000)
Setting the indoor unit installation option (suitable for the condition of each installation location)
1 Make sure that the power is supplied to the indoor unit.
• If the indoor unit is not plugged in, it must include a power supply.
2 Make sure that the panel or display is connected to the indoor unit so that it can receive options
Indoor unit
3 Set an address for each indoor unit using the remote control, according to your air conditioning system plan.
• The indoor unit addresses are set to 020010-100000-200000-300000 by default.
ki]_TXXXW^hTWX†pt†k}tG~•‹Gm™ŒŒGXžˆ †hh†lu†U•‹‹GGGZY YWYXTXWTYWGGG㝘㤸GXXa[_a\\