12_
connections
connections
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a
TV and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other devices before you connect or disconnect any cables.
- Refer to the user’s manual of the additional devices (such as a TV) you are connecting formore information
on those particular devices.
Connecting to a TV (
For Video
)
1
Using video cables(not included), connect the
VIDEO OUT
jacks on the rear of the DVD player to the
VIDEOT IN
jacks of
your TV.
2
Using the audio cables, connect the
AUDIO (red and white)
OUT
jacks on the rear of the DVD player to the
AUDIO (red
and white) IN
jacks of your TV.
Turn on the DVD player and TV.
3
Press the input selector button on your TV remote control until
the Component signal from the DVD player appears on the TV
screen.
Note
- Noise may be generated if the audio cable placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 13 to 14)
- The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD player.
RED
WHITE
RED
WHITE
Audio Cable
Video Cable
(not included)
