3-22
3-23
Disassembly and Reassembly
3-22
No
Parts
Procedure
Remark
7
Fan and motor
1)
Turn the hexagonal nut on the top of the fan
clockwise to remove it and then take the fan out
of the motor (use MONKEY SPANNER).
2)
Turn the 3 hexagonal nuts fastening the motor
counter clockwise to remove them and then
use your hand to take out the Motor Wire that
is fastened in 3 spots to remove the motor (use
MONKEY SPANNER, +SCREWDRIVER).
8
Evaporator
1)
Remove the 2 screws to remove the Holder
Evap that is fastening the heat exchanger (use
+SCREWDRIVER).
2)
Remove the Partition Evap screws (2 spots)
where the heat exchanger In/Out Pipe is located
(use +SCREWDRIVER).