S/W
Control type
Item
Display
SEG1
SEG2
SEG3
SEG4
K4
Short press
13
times
Protection control
0: Cooling
1: Heating
Protection control
0: No protection
control
1: Frozen
2: Non-stop defrost
3: Overload
4: Discharge
5: Full current
Frequency status
0: Normal
1: Hold
2: Down
3: Up_limit
4: Down_limit
14
times
Temperature of heat
insulating board (°C)
100 unit
10 unit
Single unit
15
times
S/W check details
-
-
-
Press and hold 1 time
Main MICOM version
Year
(Hex)
Month
(Hex)
Day (10 unit)
Day (single unit)
Short press
2
times
Inverter MICOM version
Year
(Hex)
Month
(Hex)
Day (10 unit)
Day (single unit)
Short press
3
times
EEPROM version
Year
(Hex)
Month
(Hex)
Day (10 unit)
Day (single unit)
❇
Press and hold the K4 button (Main MICOM version)
Press it shortly once again
Press it shortly once again (E2P
version)
❇
Condition for defrost trial operation
- Condition 1: Outdoor temperature below 10 °C
- Condition 2: All temperature condition must meet the defrost condition
3. DIP switch option
On (Default)
Off
Switch 1
Auto address setting
Manual address setting
Switch 2
-
-
Switch 3
Disable snow prevention control
Enable snow prevention control
Switch 4
-
-
❇
When the snow prevention control is in use, eco mode (standby mode) will not operate.
ENGLISH-59
04
INST
ALLA
TION
