Removal and Reassembly _ 19
Part
Figure
Description
COVER-BACK
• Remove the 4 screws holding the Back-
Cover at the back of the washing machine.
BELT
1. Separate the belt and then assembly it.
2. Check if the belt position is at the center of
the Pulley.
Assembling the belt
Place the belt around the Pulley ( )
and then over the Motor-Pulley ( ).
MOTOR
1. Separate the Wire Housing from the motor.
2. Remove the two bolts holding the motor at
the back of the washing machine.
The 2 screws designated ‘A’ which are
inside must be also removed.
3. Separate the motor.
When installing the Belt around the Motor
Pulley, the bottom of the belt must be
located on the second floor of the Motor
Pulley.
A
WF-M592NMH-YLP.indb 19
2010-2-22 13:29:45
