Cooling Your Room
To select the COOL mode, press the Mode button until is displayed
at the top of the wireless remote controller.
Result:
◆
The indoor unit beeps.
◆
The air conditioner runs in COOL mode.
2
You can change modes at any time.
To adjust the temperature, press the Temperature buttons one or more
times until the required temperature is displayed. Possible temperatures
are between 65
O
F and 86
O
F inclusive.
Result:
◆
Each time you press Temperature buttons:
- The temperature is adjusted by 1
O
F.
- The indoor unit beeps.
◆
The air conditioner starts cooling, provided that the room
◆
temperature is higher than the selected temperature ; the fan
◆
will, however, operate.
3
You must select the COOL mode if you wish to adjust the :
◆
Cooling temperature
◆
Fan speed when cooling
1
If necessary, press
(ON/OFF) button.
Result:
◆
The On/Off indicator on the unit comes on.
◆
The air conditioner runs in the mode selected when the
unit was last used.
◆
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆
Plugged in
◆
Stopped
lt will start up normally after three minutes.
IM
PORTANT
Select the fan speed by pressing the Fan button one or more times until
the intended value is displayed :
4
To control the direction of the air flow, refer to page 25.
5
N
N
o
o
t
t
e
e
Automatic(rotated :
➔
➔
)
Low
Medium
High
E-
22
ACC2400C IB_E<05381 2002.5.8 1:36 PM Page 22
