![Samsung A717 - SGH Cell Phone 26 MB User Manual Download Page 95](http://html.mh-extra.com/html/samsung/a717-sgh-cell-phone-26-mb/a717-sgh-cell-phone-26-mb_user-manual_338835095.webp)
Changing Your Settings
92
Configuring your Phone’s USB Connection
• Protocol
: set the connection protocol used by the WAP browser: WAP, HTTP, or
Other.
• Home URL
: enter the URL address of the page to be used as your homepage.
• Gateway address
: (wap1.x only) enter the gateway address of the proxy server.
• Proxy address
: (wap2.x and AT&T MMS) set the proxy server address and port.
• Linger Time (Sec.)
: set a time period (in seconds) after which the network is
disconnected if there has been no new data traffic in that time.
• Advanced Settings
: allows you to configure some of the IP-specific
information: Static IP, Static DNS, Server information, and Traffic Class.
-
Static IP
: specify if you want to manually enter an IP address. If you want the IP
address to be automatically assigned by the server, remove the check mark.
-
Local phone IP
: enter the IP address obtained from the network operator, if you
checked the Static IP option.
-
Static DNS
: specify if you want to manually enter the Domain Name Server
(DNS) address. If you want the address to be automatically assigned by the
server, remove the check mark.
-
Server 1/Server 2
: enter the Domain Name Server (DNS) addresses.
-
Traffic class
: select the traffic class.
Note:
The WAP settings may vary depending on the service provider.
Configuring your Phone’s USB Connection
Your phone can connect to a PC via the USB cable (sold separately). The phone can
be configured to open launch a default application when an active USB connection is
detected.
1.
Use the USB adapter cable to connect the handset to the target PC. When
an active connection has been established, a USB icon (
) appears on
the phone.
2.
When the Idle screen displays, press the
Menu
soft key.
3.
Select
Settings
and press the
Select
soft key or the
key.
Select
Connectivity
. Highlight
Select USB Mode
and press the
Select
soft
key or the
key. Use the
Up
or
Down
Navigation key to highlight one of
these options:
• Media Player
: sets the Media Player to launch as the default application when
a USB connection is detected. This is the default application.
• PC Studio
: sets PC Studio to launch as the default application when a USB
connection is detected.
• Ask on Connection
: requires the phone to present a “Select USB Mode”
pop-up which requires you to assign a default USB application.