•
Dial the trunk number.
•
You may now answer the call by pressing
ANS
.
OR
You may use
NND
to view more information about this call.
OR
You can return to the idle condition by pressing
IGNORE
.
NOTES:
1. If you are on an intercom call or you have Automatic Hold turned off, you
must finish the existing call or place it on hold before inquiring.
2. If you inquire about an outgoing call, you will receive a [call no longer avail-
able] display.
REVIEWING PAST CID/ANI CALLS
This feature allows you to review CID information for calls sent to your keyset.
This list can contain 10–50 calls in a first-in, first-out basis. The list includes
calls that you answered and calls that rang your keyset but that you did not
answer. When reviewing this list, you can press one button to dial the person
back. The system must be using LCR to dial the stored number. To access the
CID information stored in your REVIEW list:
•
Press the
REVIEW
key
OR
Press the
CID
key and then press the
REVIEW
soft key.
•
If you have entries in your review list, the oldest call will be shown first.
•
You can now
CLEAR
this entry.
OR
Use
NND
to view more information about this call.
OR
Press
DIAL
to call this person back.
OR
Press
SCROLL
and then press
STORE
to save this number in a personal
speed dial bin.
NOTES:
1. Each keyset defaults with ten review bins. Please see your system adminis-
trator to determine the number of bins assigned to your keyset.
2. Your system must have LCR correctly programmed to allow you to
DIAL
numbers from the review list or to
STORE
entries from the review list.
LCR WITH CLEAR
When you are making an outside call using LCR and dial an incorrect digit, you
can press the
CLEAR
soft key to reenter the telephone number. You do not need
to redial
9
to reaccess LCR.
44
ADD-ON MODULE
WITH KEYSET
The add-on module (AOM) is used when you need more programmable keys or
executive off-hook voice announce (OHVA). The extra programmable keys are
used exactly as are the ones on your keyset. Make them
DSS/BLF
keys, C.O.
line keys, One Touch Speed Dial buttons or any combination of these and other
feature keys. A maximum of two AOMs can be added to any keyset.
The
UP
and
DOWN
arrow keys are used to adjust the speaker level for execu-
tive off-hook voice announce. The
MUTE
key is used to mute the microphone
during an Executive OHVA. The
SPK
key has no function in this arrangement.
Use the
SPK
key on your keyset when instructed throughout this user guide.
WITHOUT KEYSET
This 32 button AOM can be used by itself (stand-alone) for basic internal com-
munications when a handset and dial pad are not required.
Assign these keys as feature keys,
DSS/BLF
keys or One Touch Speed Dial
buttons.
In the Auto Answer mode, use the AOM as a room monitor or intercom box. This
allows use of the four feature keys at the bottom:
VOL UP/DOWN
,
MUTE
and
SPK
.
45
64 BUTTON MODULE
WITH KEYSET
[RELEASE 3.3 & 4 ONLY]
The 64 button module is used when you need more programmable keys added
to your keyset. The 64 red LED’s provide visual indication of calls and features.
The extra programmable keys are used exactly like the ones on your keyset.
Make them DSS/BLF keys or feature keys. As a DSS/BLF the size of the 64
button module allows for greater call status and faster call processing. The 64
button module does not support executive off-hook voice announce (OHVA)
and does not have a microphone. A maximum of two 64 button modules can be
assigned to any keyset.
