manualshive.com logo in svg

Samsung 7050 series, User Manual

Share
Download
Samsung 7050 series User Manual Download Page 350

◀

▶

English

◀

Issues 

Solutions and Explanations

There is a plastic smell 
from the TV.

 

•

This smell is normal and will dissipate over time.

The TV 

Signal Information

 

is unavailable in the 

Self 

Diagnosis

 menu.

 

•

This function is only available for digital channels the TV receives from an 
Antenna / RF/Coax connection.

The TV is tilted to the side.

 

•

Remove the base stand from the TV and reassemble it.

The channel menu is 
greyed out (unavailable).

 

•

The 

Channel

 menu is only available when you select the TV source.

Your settings are lost after 
30 minutes or every time 
the TV is turned off.

 

•

If the TV is in the 

Store Demo 

mode, it will reset audio and picture settings 

every 30 minutes. Change the settings from 

Store Demo

 mode to 

Home 

Use

 mode using the 

Plug & Play

 procedure. Press the 

SOURCE

 button 

to select 

TV

 mode, and go to 

MENU

 

→

 

System

 

→

 

Plug & Play

 

→

 

ENTER

E

.

Summary of Contents for 7050 series

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands