manualshive.com logo in svg

Samsung 7050 series, User Manual

Share
Download
Samsung 7050 series User Manual Download Page 343

▶ ◀

▶

English

Issues 

Solutions and Explanations

3D
The 3D Active Glasses are 
not working correctly

 

•

Make sure the glasses are turned on.

 

•

The 3D Active Glasses may not work properly if there is any other 3D 
product or electronic devices turned on near the glasses or TV.

 

•

If there is a problem, keep other electronic devices as far away as possible 
from the 3D Active Glasses.

The 3D images don’t look 
quite right.

 

•

The ideal viewing distance is three times or more the height of the screen.

 

•

We also recommend sitting with viewer’s eyes on a level with the screen

The batteries in the 3D 
glasses don’t last

 

•

Turn off 3D glasses while not using them. If you leave 3D glasses on, battery 
lifespan is shortened

Summary of Contents for 7050 series

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands