manualshive.com logo in svg

Samsung 7050 series, User Manual

Share
Download
Samsung 7050 series User Manual Download Page 170

◀

▶

English

◀

 

●

Boot Logo (Off / On)

: Displays the Samsung logo when the TV is turned on.

 

●

Light Effect (Off / In Standby / Watching TV / Always) 

 For LED 8000 series 

: You 

can turn the LED on the TV’s front panel on or off. Turn it off to save power or if 
the LED is too bright for you.

 

N

Set the 

Light Effect

 to 

Off

 to reduce the power consumption.

 

N

The color of light may very depending on the model.

 

●

TV Name

: Sets the TV name so you can find it easily on a mobile device.

 

N

If you select the 

User Input

, you can type on the TV using the OSK (On 

Screen Keyboard).

Summary of Contents for 7050 series

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands