Samsung 700A3D User Manual Download Page 93

Page: 93 / 138

Chapter 4.

Settings and Upgrade

Changing the Boot Priority

You can change the boot priority in the BIOS Setup.

Select the

Boot

menu in the BIOS Setup.

Press <

Enter

> on the

Set Boot Order

item.

BIOS Setup

Main

Advanced Security

Boot

Exit

Select boot priority of
boot devices.

Fast Boot
Booting By LAN
Secure Boot

Set Boot Order

[Disabled]
[Disabled]
[Enabled]

屁

Press <

Enter

> on the

Boot Option #1

item.

Select the drive to boot from.

BIOS Setup

Boot

Boot Option #1 [Windows Boot Manager]

Boot Option #2 [XXXX-XXXX-XXXX]

Keys used to view on
configure devices:



and



arrows select

device.
<F6>, <F5> move the
device up or down.

Boot Option #1

Windows Boot Manager
XXXX-XXXX-XXX
Disabled

Press the

F10

key to save and exit the BIOS Setup.

The boot priority will be changed.

Summary of Contents for 700A3D











































































































































Search results

Summary of Contents for 700A3D

Reviews:

Related manuals for 700A3D

Brands by name

Popular brands

Samsung 700A3D, User Manual

Search results

Summary of Contents for 700A3D

Reviews:

Related manuals for 700A3D

Brands by name

Popular brands