Samsung 700A3D User Manual Download Page 87

Page: 87 / 138

Chapter 4.

Settings and Upgrade

BIOS Setup

The BIOS Setup enables you to con

igure your computer hardware

according to your needs.

Use the BIOS setup to deine a boot password, change the

•

booting priority, or add a new device.
Since incorrect settings may cause your system to

•

malfunction or crash, take care when coniguring the BIOS.
The functions of the BIOS setup are subject to change for

•

product function enhancement purposes.
The BIOS Setup menus and items may difer depending on

•

your computer model.

Entering the BIOS Setup

Turn the computer on.

Immediately press the

key several times.

After a moment, the BIOS setup screen appears.

The items in the BIOS setup may difer depending on the
product.

Summary of Contents for 700A3D











































































































































Search results

Summary of Contents for 700A3D

Reviews:

Related manuals for 700A3D

Brands by name

Popular brands

Samsung 700A3D, User Manual

Search results

Summary of Contents for 700A3D

Reviews:

Related manuals for 700A3D

Brands by name

Popular brands