Samsung 7+ series User Manual Download

Page: 15 / 65

English

Basic Featur

Scheduled

(in

Channel Manager

)

You can view, modify or delete a show you have reserved to
watch.

■

Change Info

: Change a show you have reserved to

watch.

■

Cancel Schedules

: Cancel a show you have reserved

to watch.

■

Information

: Display a show you have reserved

to watch. (You can also change the reservation
information.)

■

Select All / Deselect All

: Select or deselect all reserved

programmes.

Fine Tune

(analogue channels only)
If the signal is weak or distorted, fine tune the channel
manually.

✎

Fine tuned channels are marked with an asterisk “*”.

✎

To reset the fine-tuning, select

Reset

Picture Menu

Changing the Preset Picture Mode

Mode

Select your preferred picture type.

■

Dynamic

: Suitable for a bright room.

■

Standard

: Suitable for a normal environment.

■

Relax

: Suitable for reducing eye strain.

✎

Relax

is not available in PC mode.

■

Movie

: Suitable for watching movies in a dark room.

Adjusting Picture Settings

Cell Light / Contrast / Brightness /

Sharpness / Colour / Tint (G/R)

Your television has several setting options for picture quality
control.

✎

NOTE

In analogue

TV, Ext., AV

modes of the PAL system,

the

Tint (G/R)

function is not available.

In PC mode, you can only make changes to

Cell

Light, Contrast

and

Brightness

Settings can be adjusted and stored for each
external device connected to the TV.

Economical Solutions

Eco Solution

■

Energy Saving (Off / Low / Medium / High /
Picture Off)

: Adjust the brightness of the

TV in order to reduce power consumption. If you select

Picture Off

, the screen is turned off, but the sound

remains on. Press any button except volume button to
turn on the screen. Until the screen turns on again, a
distorted picture will be displayed for about 4 seconds.

■

Eco Sensor (Off / On)

: To enhance your power savings;

the picture settings will automatically adapt to the light
in the room.

✎

If you adjust the

Cell Light

, the

Eco Sensor

will

be set to Off.

Min Cell Light

: When

Eco sensor

, the minimum

screen brightness can be adjusted manually.

✎

Eco Sensor

, the display brightness

may change (become slightly darker or brighter)
depending on the surrounding light intensity.

■

No-Signal Power Off (Off / 15 min / 30 min / 60 min)

To avoid unnecessary energy consumption, set how long
you want the TV to remain on if it’s not receiving a signal.

✎

Disabled when the PC is in power saving mode.

[PC7000_UK]BN68-02696J-00Eng.indb 15

2010-03-26 오후 6:35:09

Summary of Contents for 7+ series


































































Search results

Summary of Contents for 7+ series

Reviews:

Related manuals for 7+ series

Brands by name

Popular brands

Samsung 7+ series, User Manual

Search results

Summary of Contents for 7+ series

Reviews:

Related manuals for 7+ series

Brands by name

Popular brands