Samsung 7+ series User Manual Download

Page: 10 / 65

English

Connections

Changing the Input Source

Source List

Use to select TV or other external input
sources such as DVD / Blu-ray players
/ cable box / STB satellite receiver
connected to the TV.

■

TV / Ext. / PC / AV / Component
/ HDMI1/DVI / HDMI2 / HDMI3 /
HDMI4 / USB

✎

In the

Source List

, connected

inputs will be highlighted.

✎

Ext.

and

always stay activated.

Edit Name

■

VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC /
DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA

Name the device connected to the input jacks to make
your input source selection easier.

✎

When a PC with a resolution of 1920 x 1080 @
60Hz is connected to the

HDMI IN 1(DVI)

port,

you should set to

DVI PC

mode under

Edit Name

✎

When connecting an HDMI/DVI cable to the

HDMI IN 1(DVI)

port, you should set to

DVI PC

DVI Devices

mode under

Edit Name

CONNECTIONS

COMMON INTERFACE

Slot

To watch paid channels, the “CI or CI+ CARD” must be inserted.

If you don’t insert the “CI or CI+ CARD,” some channels will
display the message “Scrambled Signal”.

The pairing information containing a telephone number, the “CI or
CI+ CARD” ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider.

When the configuration of channel information has finished, the
message “Updating Completed” is displayed, indicating the
channel list is updated.

✎

NOTE

You must obtain a “CI or CI+ CARD” from a local cable service provider.

When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may
cause damage to it.

Insert the “CI or CI+ CARD” in the direction marked on the card.

The location of the

COMMON INTERFACE

slot may be different depending on the model.

“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

If you have any problems, please contact a service provider.

Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be
seen.

SOURCE

[PC7000_UK]BN68-02696J-00Eng.indb 10

2010-03-26 오후 6:35:06

Summary of Contents for 7+ series


































































Search results

Summary of Contents for 7+ series

Reviews:

Related manuals for 7+ series

Brands by name

Popular brands

Samsung 7+ series, User Manual

Search results

Summary of Contents for 7+ series

Reviews:

Related manuals for 7+ series

Brands by name

Popular brands