Samsung 6235ANH User Manual Download

Page: 132 / 138

129

Chapter 5
Appendix

The system specifications may differ depending on the derived
models.

For detailed system specifications, refer to the product catalogue.

CPU (Optional)

Intel® Dual-Core™ i5/i7 Processor

Intel® Quad-Core™ i7 Processor

Main Memory

Memory type: DDR3 SODIMM

Main Chipset
(Optional)

Intel HM65

Intel HM76

Storage Device
(Optional)

9.5mmH SATA 2/3 HDD

SSD

Graphics (Optional)

NVidia GT 630M/640M/650M (Optimus)

AMD Radeon HD 6490M (PowerXpress)

AMD Radeon HD 6750M (PowerXpress)

Intel HD Graphics (Internal)

Operating
Environment

Temperature: -5~40°C for storage,

10~32°C when operating

Humidity: 5~90% for storage,

20~80% when operating

AC/DC Rating
(Optional)

Input: 100-240VAC, 50/60Hz,

Output: 19VDC 3.16A, 19VDC 4.74A,

19VDG 6.32A

PC Rating (Optional)

19VDC 3.16A (60W), 19VDC 4.74A (90W),
19VDG 6.32A (120W)

Optional components may not be provided or different

components may be provided depending on the computer
model.

The system specifications are subject to change without

notice.

The hard disk drive capacity of a computer in which

Samsung Recovery Solution is installed, is represented as
smaller than the product specification.

The amount of memory that Windows can use may be

smaller than the actual amount of memory available.

Product Specifications

Summary of Contents for 6235ANH











































































































































Search results

Summary of Contents for 6235ANH

Reviews:

Related manuals for 6235ANH

Brands by name

Popular brands

Samsung 6235ANH, User Manual

Search results

Summary of Contents for 6235ANH

Reviews:

Related manuals for 6235ANH

Brands by name

Popular brands