Samsung 520DXN - SyncMaster - 52" LCD Flat Panel Display Page 44 User Manual Download

Page: 44 / 129

Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model
list and click the "Next" button.

If you can see following message window, then click the "Continue Anyway" button. Then click
"OK" button.

Note

This monitor driver is under certifying MS logo, and this installation doesn't damage your system.

The certified driver will be posted on Samsung Monitor homepage.

http://www.samsung.com/

Click the "Close" button then click "OK" button continually.

Using the Software

Summary of Contents for 520DXN - SyncMaster - 52" LCD Flat Panel Display


































































































































Search results

Summary of Contents for 520DXN - SyncMaster - 52" LCD Flat Panel Display

Reviews:

Related manuals for 520DXN - SyncMaster - 52" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 520DXN - SyncMaster - 52" LCD Flat Panel Display, User Manual

Search results

Summary of Contents for 520DXN - SyncMaster - 52" LCD Flat Panel Display

Reviews:

Related manuals for 520DXN - SyncMaster - 52" LCD Flat Panel Display

Brands by name

Popular brands