Samsung 460UXn - SyncMaster - M User Manual Download Page 32

Page: 32 / 122

Note

This monitor driver is certified by Microsoft, and installing it will not damage your system.

The certified driver will be posted on Samsung Monitor homepage.

http://www.samsung.com/

Installing the Monitor Driver (Manual)

Microsoft

Windows Vista™‚ Operating System

Insert your Manual CD into your CD-ROM drive.

Click

(Start) and "Control Panel". Then, double-click on "Appearance and Personal-

ization".

Click "Personalization" and then "Display Settings".

Click "Advanced Settings...".

Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means
the configuration for your monitor is completed. The monitor can be used as is.

Using the Software

Summary of Contents for 460UXn - SyncMaster - M



























































































































Search results

Summary of Contents for 460UXn - SyncMaster - M

Reviews:

Related manuals for 460UXn - SyncMaster - M

Brands by name

Popular brands

Samsung 460UXn - SyncMaster - M, User Manual

Search results

Summary of Contents for 460UXn - SyncMaster - M

Reviews:

Related manuals for 460UXn - SyncMaster - M

Brands by name

Popular brands