Samsung 460UXn - SyncMaster - M User Manual Download Page 25

Page: 25 / 122

Connect a Component cable between the BNC/COMPONENT IN [R/Y, G/P

, B/P

] port

on the LCD Display and the P

, Y, P

jacks on the DVD player.

Note

•

Select

Component

for the connection to a DVD player using the SOURCE button on the

front of the LCD Display or on the remote control.

•

Then, start the DVD Player with a DVD disc inserted.

•

A component cable is optional.

•

For an explanation of Component video, consult your DVD manual.

Connecting using a Component Cable

Connect a set of audio cables between the AV/COMPONENT AUDIO IN [L-AUDIO-R]
on the LCD Display and the AUDIO OUT jacks on the DVD player or other external
device.

Connect the Component/ D-sub cable to the RGB/COMPONENT IN ports on the monitor.

Note

•

Select Component using the SOURCE button on the front of the LCD Display or on the
remote control.

•

Then, start the DVD Player with a DVD disc inserted.

•

A component cable is optional.

•

For an explanation of Component video, consult your DVD or external device's user man-
ual.

Connections

Summary of Contents for 460UXn - SyncMaster - M



























































































































Search results

Summary of Contents for 460UXn - SyncMaster - M

Reviews:

Related manuals for 460UXn - SyncMaster - M

Brands by name

Popular brands

Samsung 460UXn - SyncMaster - M, User Manual

Search results

Summary of Contents for 460UXn - SyncMaster - M

Reviews:

Related manuals for 460UXn - SyncMaster - M

Brands by name

Popular brands