manualshive.com logo in svg

Samsung 400MX - SyncMaster - 40" LCD Flat Panel Display, User Manual

Share
Download
Samsung 400MX - SyncMaster - 40

 

  Screen

 

 

 

 

 

 

 

Photo File: Selects a photo file to play in the Photo area.

 

 

Aspect Ratio: Selects the aspect ratio for the photo files to be played in the Photo area. 

z

Full: The photo file is enlarged or reduced to fit the entire background.  

z

Original: The photo file is displayed at the original size.  

z

Auto: The photo file is enlarged or reduced to fit the entire background and keeps the original 
aspect ratio.  

z

Tile: The photo file is tiled continuously across the entire background.  

 

 

Time Interval: Sets the slide show time between selected photo files.  

 

 

 

 

 

  Background 

 

 

 

 

 

 

 

Type: Sets the background type (Color, Picture File) for the Photo area.

 

 

Color: Selects the color when the background type for the Photo area is set to Color.

 

 

Transparency: Selects the degree of transparency when the background type for the Photo area is set to 
Color. 

If the Transparency is set to a value under 100, the area which is placed beneath the present area 
is shown transparently. However, if a Movie is playing in one of the areas, the transparency doesn't 
affect the movie area.

Summary of Contents for 400MX - SyncMaster - 40" LCD Flat Panel Display














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands