Samsung 400MX - SyncMaster - 40" LCD Flat Panel Display User Manual Download Page 41

Page: 41 / 205

Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model
list and click the "Next" button.

If you can see following message window, then click the "Continue Anyway" button. Then click
"OK" button.

Note

This monitor driver is under certifying MS logo, and this installation doesn't damage your system.

The certified driver will be posted on Samsung Monitor homepage.

http://www.samsung.com/

Click the "Close" button then click "OK" button continually.

Using the Software

Summary of Contents for 400MX - SyncMaster - 40" LCD Flat Panel Display














































































































































































































Search results

Summary of Contents for 400MX - SyncMaster - 40" LCD Flat Panel Display

Reviews:

Brands by name

Popular brands

Samsung 400MX - SyncMaster - 40" LCD Flat Panel Display, User Manual

Search results

Summary of Contents for 400MX - SyncMaster - 40" LCD Flat Panel Display

Reviews:

Brands by name

Popular brands