Samsung 400MX - SyncMaster - 40" LCD Flat Panel Display User Manual Download Page 20

Page: 20 / 205

Dimensions

Notice

For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length.

Wall Bracket Installation

•

Contact a technician for installing the wall bracket.

•

SAMSUNG Electronics is not responsible for any damages to the product or harm to customers
when the installation is done by the customer.

•

This product is for installing on cement walls. The product may not stay in place when installed
on plaster or wood.

Components

Only use the components and accessories shipped with the product.

Wall Bracket(1)

Hinge(Left 1, Right
1)

Plastic
Hanger
(4)

Screw
(A)(11)

Screw(B)
(4)

Anchor
(11)

Wall Bracket Assembly

Note

There are two hinges(left and right). Use the correct one.

Insert and tighten the Captive Screw in the direction of the arrow.

Introduction

Summary of Contents for 400MX - SyncMaster - 40" LCD Flat Panel Display














































































































































































































Search results

Summary of Contents for 400MX - SyncMaster - 40" LCD Flat Panel Display

Reviews:

Related manuals for 400MX - SyncMaster - 40" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 400MX - SyncMaster - 40" LCD Flat Panel Display, User Manual

Search results

Summary of Contents for 400MX - SyncMaster - 40" LCD Flat Panel Display

Reviews:

Related manuals for 400MX - SyncMaster - 40" LCD Flat Panel Display

Brands by name

Popular brands