42
ENG
You can compensate a poor rental tape.
1
Insert the cassette in the compartment, press the
PLAY/PAUSE
(
) button.
2
Press the
CRYSTAL PB
button on the remote control.
Result:
The
CRYSTAL PB
option is displayed with
Off
➢
When Picture is set to Auto on VCR menu, initial setting
CRYSTAL PB
is
ON
.
3
To activate (to
On
) the feature, press the
CRYSTAL PB
button
again.
➢
◆
This feature activates only when a tape is being
played.
◆
If the tape is reinserted, the
CRYSTAL PB
becames
Off
.
Adjusting the Picture Quality during Playback
This set has an inbuilt tape alignment system (A.TRK) that selects
the optimum position for the tape automatically. If, however, noise
bars (streaks) appear at the top or bottom of the picture during
playback (particularly in slow motion), you can adjust the
alignment of the image to obtain the best possible picture.
Picture stability can be adjusted more easily in the Pause and Slow
Motion modes.
To adjust alignment, press the
TRK
or
button until the picture is
clear and stable.
➢
Even if you cannot remove all noise bars, choose the
setting that gives the clearest picture.
Using the Crystal PlayBack
C18A_ENG_europe_17"_film 10/10/03 4:11 PM Page 42
