Samsung 2493HM - SyncMaster - 24" LCD Monitor Service Manual Download Page 4

Page: 4 / 60

3-1

3. Disassembly and Reassemble

3. Disassembly and Reassemble

This section describes the disassembly and reassembly sequences for this monitor.

WARNING: As this monitor has parts that are sensitive to static electricity, be careful when handling them.

3-1. Disassembly

Cautions: 1. Turn the monitor off before beginning the disassembly process.

2. Disassemble the monitor carefully as directed in the following procedures.

3. When disassembling the monitor, do not use any metal tools except for the provided jig.

Part

Description

Picture Description

Screws

Stand

1. Place the monitor down onto a table

covered by a soft cloth and remove

the 4 screws from the stand.

2. Remove 4 screws.

Summary of Contents for 2493HM - SyncMaster - 24" LCD Monitor





























































Search results

Summary of Contents for 2493HM - SyncMaster - 24" LCD Monitor

Reviews:

Related manuals for 2493HM - SyncMaster - 24" LCD Monitor

Brands by name

Popular brands

Samsung 2493HM - SyncMaster - 24" LCD Monitor, Service Manual

Search results

Summary of Contents for 2493HM - SyncMaster - 24" LCD Monitor

Reviews:

Related manuals for 2493HM - SyncMaster - 24" LCD Monitor

Brands by name

Popular brands