manualshive.com logo in svg

Samsung 172S, User Manual, Page: 23 / 69

Share
Download
Samsung 172S User Manual Download Page 23

When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor. Driver installation is slightly different from one operating 
system to another. Follow the directions as appropriate for the operating system you 
have.

Prepare a blank disk and download the driver program file at the Internet web site shown 
here.

z

 

Internet web site : 

http://www.samsung-monitor.com/

 (

Worldwide

)

http://www.samsung

usa

.com/

monitor

 (USA)

http://www.sec.co.kr/

monitor

 (Korea)

http://www.samsungmonitor.com.cn/

 (China)

Microsoft

®

 Windows

®

 XP Operating System

1. Insert CD into the CD-ROM driver. 
2. Click "

Start

" —> "

Control Panel

" then click the "

Appearance and Themes

" Icon. 

   

3. Click "

Display

" icon and choose the "

Settings

" tab then click "

Advanced..

".

   

4. Click the "

Properties

" button on the "

Monitor

" tab and select "

Driver

" tab. 

User’s Manual

Setup

Summary of Contents for 172S






































































Reviews:

No comments