10
E-
10
E-
10
10
Close the electrical component box cover and tighten the screws.
7
Attach and close the front grille.
• Make sure the hooks on the rear side of grille fits properly into the
grooves on panel (
) and then push the panel to close (
).
8
Check out that the panel is fixed to the indoor unit.
• Fix screws tightly between the panel and the surface of the ceiling.
If the panel is installed incorrectly, air may leak.
• Do not block any discharge vents in the panel.
9
For 4 Way Cassette(Continued)
Grille
Hook
NOTE
If the angle on the air flow blades has been changed by user
due to opening the front grille for installation or maintenance,
you must turn off the circuit breaker and turn it on again before
using the air conditioner.
Otherwise, angles of the each angle can be different or some of
the blade may not close when the product is off.
NASA_PANEL_IM_EN_03683A(1).indd 10
2013-01-14 오후 8:35:41
