manualshive.com logo in svg

Samson TRUCK MASTER 1700, Instruction Manual, Page: 3 / 36

Share
Download
Samson TRUCK MASTER 1700 Instruction Manual Download Page 3

    |    DOC9091B

3

Truck Master 1700

5 

Service, operation, maintenance and inspection intervals.............................................21

5.1 

Draining the liquid separator and the pump .......................................................................... 21

5.2 

Check grease cartridges  ....................................................................................................... 21

5.3 Winterization ......................................................................................................................... 21
5.4 

Lubrication of bearings ......................................................................................................... 22

5.5 

Inspection and cleaning of water supply pipe ........................................................................ 22

5.6 

Inspection and cleaning of internal channels  ........................................................................ 22

6 Troubleshooting ...................................................................................................................23

7 

Spare parts and tools ..........................................................................................................24

7.1 

Marking and identification ..................................................................................................... 24

7.2 

How to order ......................................................................................................................... 25

7.3 

Spare parts ............................................................................................................................ 26

7.4 Adaptor ................................................................................................................................. 30
7.5 

Gasket set ............................................................................................................................. 31

7.6 

Special tool set ...................................................................................................................... 32

Summary of Contents for TRUCK MASTER 1700





































Reviews:

No comments