7.5.2 Setting parameters
1. Click on the
Parameter #1 or Parameter #2 folder to view the parameter settings.
The settings of the selected parameter level are displayed.
The parameters listed in the screen shot below are default settings.
2. Change settings:
Double-click the required parameter to
open pop-up window to modify parame-
ter settings.
Right-click on the required parameter to
open pop-up window to modify parame-
ter settings:
[Modify]
Opens pop-up window to modify parameter settings
[Read]
Uploads parameter value from device.
Displayed only in offline mode (see section 8.1.1)
[Write]
Downloads parameter value to device.
Displayed only in offline mode (see section 8.1.1)
[Default: ...]
Resets parameter to default setting (setting in gray to indicate that the
parameter value is the same as the default setting)
36
EB 5757-7 EN
Configuration and operation using TROVIS-VIEW interface