7.3
Starting TROVIS-VIEW and performing settings
You can perform the settings in TROVIS-VIEW either when the actuator is connected (online)
to the PC or without direct connection (offline) (refer to section 8).
Note:
When the device is not connected, the default settings appear on the operator inter-
face or, alternatively, a stored TROVIS-VIEW file (*.tro) can be loaded and overwritten by
selecting Open in File menu.
1. Start TROVIS-VIEW. The operator interface appears with menubar and toolbar as well as
various folders.
You can read key information on this screen:
Online/offline mode:
The
icon on the onlinebar is animated in online mode (see sec-
tion 8.1.2).
User level:
The active user level (Customer or Specialist) is indicated on the status bar
(see section 7.4).
32
EB 5757-7 EN
Configuration and operation using TROVIS-VIEW interface