manualshive.com logo in svg

Samson EB 3967 EN, Mounting And Operating Instructions

Share
Download
Samson EB 3967 EN Mounting And Operating Instructions Download Page 7

EB 3967 EN 

 7

Safety instructions and measures

Referenced standards, directives and regulations

Devices with a CE marking fulfill the following requirements of the Directives:
−  Type 3967: 2014/30/EU, 2014/35/EU, 2011/65/EU, 2015/863/EU
−  Type 3967-1 and Type 3967-8: 2014/30/EU, 2014/34/EU, 2011/65/EU
Devices with an EAC marking fulfill the following requirements of the Regulations:
−  Type 3967: TR CU 020/2011
−  Type 3967-113 and Type 3967-813: TR CU 012/2011 with the applicable GOST stan

-

dards:

−  ГОСТ

 31610.0-2014 (IEC 60079-0:2011

−  ГОСТ

 31610.11-2014 (IEC 60079-11:2011)

−  ГОСТ 

31610.15-2012/

МЭК 

60079-15-2005

−  ГОСТ

 IEC 60079-31-2013)

See Annex for declarations of conformity and EAC certificates.

Referenced documentation

The following documents apply in addition to these mounting and operating instructions:

− 

The mounting and operating instructions of the components on which the solenoid valve 
is mounted (valve, actuator, valve accessories etc.)

− 

Safety manual 

u

 SH 3967

The latest versions of the documents are available on our website at 

u

 www.samsongroup.com.

Summary of Contents for EB 3967 EN













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands