Samson 5827, Mounting And Operating Instructions, Page: 50 / 92

8-8 EB 5827-2 EN
Operation
Transferring data onto a computer
1. Insert the memory pen together with modular adapter into the serial interface (COM
port) of the computer (see Annex for accessories).
2. Select 'Read Logged Data' from the 'Memory Pen' menu.
3. Select the desired target directory. If the target directory is not changed, data will be
saved in the SAMSON folder > Type 5827.
4. Enter the file name.
5. Click 'Save' to start data transmission.
8.4.3 Command mode
In closed-loop operation, the actuator stem can be moved to the top or bottom end position
using the command pen regardless of the input signal.
Possible settings:
− No command
− Retract actuator stem
− Extend the actuator stem
8.5 Readings in TROVIS-VIEW
8.5.1 Operating values
The values in the Operating values folder cannot be changed.
In online mode , the current operating values are listed in the 'Operating values' folder. De-
pending on the basic setting, a graph is shown under the 'Operating values' window.
8.5.2 Operating states
Error messages can be read in the 'Service' folder ('Operating states').
Operating states and errors are also indicated by the LEDs (see section 8.2).
Note
Note