manualshive.com logo in svg

Samson 42-37, Mounting And Operating Instructions

Share
Download
Samson 42-37 Mounting And Operating Instructions Download Page 2

 Definition of signal words 

Hazardous situations which, if not avoided, 
will result in death or serious injury

Hazardous situations which, if not avoided, 
could result in death or serious injury

Property damage message or malfunction

Additional information

Recommended action

DANGER

!

WARNING

!

NOTICE

!

Note

Tip

 

EB 3017 EN

Note on this excerpt from the mounting and operating instructions

This document contains an excerpt from the mounting and operating instructions named on 

the front cover. The structure of the overall document is based on the categories defined in 

VDI 2770 Directive and serves to classify the documentation. The contents of this part docu-

ment apply to the category specified after the number of the mounting and operating instruc

-

tions (e.g. EB xxxx followed by ‘-03-0x‘ indicating the category). The part document only 
covers a restricted part of the manufacturer information available for this product.
To ensure a safe use of the product, all persons handling the product must read and under-
stand the following parts of the mounting and operating instructions before performing any 
work on it:

 

−

Section on safety instructions and measures

 

−

Sections describing the work to be performed

 

Î

Refer to the overall document for any information not included in this part document.

Documents relating to the device, such as the mounting and operating 
instructions, are available on our website at 

www.samsongroup.com > 

Service & Support > Downloads > Documentation

.

Summary of Contents for 42-37





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands